Canon Microfilm Scanner 500 Інструкція з експлуатації - Сторінка 19
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Сканер Canon Microfilm Scanner 500. Canon Microfilm Scanner 500 48 сторінок.
Друкувати сторінку
8 Print Density display
9 Print Density Adjustment keys
!º AE key
!¡ Reset key
!™ Print/Error display
!£ Print Number Setting keys
!¢ Clear/Stop key
!fi
Print Start key
!§ Film Control knob (optional)
!¶ Adjust Mode indicators
!•
Image Adjust Select key
!ª Image Adjust Control dial
Displays the selected print density. Also displays the sharpness and date
messages when you set these features.
Press to select print density automatically. You can also use this key to select
the sharpness level and date.
Turns automatic print density selection on and off.
Use this key to restore or change default settings.
Displays the number of prints (01 to 99). Also displays User Calls and Service
Calls.
User Calls
Warn you of problems that require your immediate attention. A user call is a 2-
digit code consisting of a letter and a number. User Call L4, for example, means
the printer door is open. (➞38)
Service Calls
Warn you of problems that require the service of a qualified technician. Service
calls are 4-digit codes consisting of the letter E and number and then two
numbers shown alternately in the display. If you see E2 and 03 displayed
alternately, this means Service Call E203. (➞39)
Sets the number of prints to print for each image. Press the plus key to increase the
number of prints, or press the minus key to decrease the number prints. These
keys are also used to set an area for printing.
Stops printing or resets the number of prints to 1 (the default).
Press to start printing or to re-start printing after a paper jam.
Transports film through an electronic carrier. Turn knob right to send film for-
ward, or left to rewind it. (The knob does not operate while you are using the FS
Controller I or FS Controller III carrier.)
The illuminated lamp identifies the type of image adjustment you can make. You
can switch the adjustment type by pressing the Image Adjust Select key (!•).
ZOOM
Adjusts the magnification.
FOCUS
Adjusts the focus.
ROTATION
Rotates the image.
Selects the type of adjustment you can make:
Focus, or
Rotation.
You use this dial to adjust the magnification, focus, or rotation.
15
Work safely!
Zoom magnification,