AdValue Photonics AP-ML1 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади AdValue Photonics AP-ML1. AdValue Photonics AP-ML1 10 сторінок. 2 micron high power mode-locked fiber laser
Друкувати сторінку
f. The alignment of optical components in the path of a Class 4 laser beam should
be initially and periodically checked.
Outdoor and construction installation of Class 4 Laser Products:
Class 4 lasers in outdoor and similar environments should only be operated by personnel
adequately trained in their use and approved by the laser safety officer. To minimize
possible hazards, the following precautions should be employed.
a. Personnel should be excluded from the beam path at all points where the beam
irradiance or radiant exposures exceed the MPEs unless they are wearing
appropriate protective eyewear and clothing. Engineering controls such as
physical barriers, interlocks limiting the beam traverse and elevation, etc. should
be used wherever practicable to augment administrative controls.
An alternative solution is to place the operator inside a local enclosure which
provides protection from errant beams and gives good all-around visibility.
b. The intentional tracking on non-target vehicular traffic or aircraft should be
prohibited within the nominal ocular hazard distance.
c. The beam paths should, whenever practicable, be cleared of all surfaces capable
of producing unintended reflections that are potentially hazardous, or the hazard
area should be extended appropriately.
2. Limited Warranty
Certification
AdValue Photonics certifies that this product has been thoroughly tested and inspected.
AdValue Photonics has found this product to meet published specifications prior to
shipping. Upon receiving the product, check the packaging and contents for possible
damage that may have occurred in transit. If damage is apparent please contact AdValue
Photonics immediately.
AdValue Photonics warrants to the original purchaser that this product is free from
defects in materials and workmanship for 12 months from the date of shipment. The
warranty as stated shall be null and void upon (1) any modification of or amendment to a
Product by any person or entity other than AdValue Photonics, (2) misuse or abuse of a
Product by the customer (3) accident, disaster or event of force majeure, (4) causes
external to a Product such as, but not limited to, power failure or electrical power surges.
3. Repairs
In-Warranty Repairs
1. Refer all servicing to qualified AdValue Photonics personnel. All returned
products require a Return Merchandise Authorization (RMA) from AdValue
Photonics.
6/10