Coitech 18-2820 Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Обігрівач Coitech 18-2820. Coitech 18-2820 10 сторінок. Industrial fan heater
Друкувати сторінку
Information requirment for the electric local space heaters
Model identifier(s): IFH01-20
Item
Symbol
Value
Unit Item
Heat output
Nominal heat output
P
2.0
kW
nom
Minimum heat output
kW
P
0.65
min
(indicative)
Maximum continuous
P
2.0
kW
max, c
heat output
Auxiliary electricity
---
---
---
consumption
At nominal heat
el
N/A
kW
max
output
At minimum heat
el
N/A
kW
min
output
In standby mode
el
N/A
kW
SB
Contact details
CLAS OHLSON AB, SE-793 85 INSJÖN, SWEDEN
Unit
Type of heat input, for electric storage
local space heaters only (select one)
manual heat charge control, with
No
integrated thermostat
manual heat charge control with
room and/or outdoor temperature
No
feedback
electronic heat charge control with
room and/or outdoor temperature
No
feedback
fan assisted heat output
No
Type of heat output/room temperature
control (select one)
single stage heat output and no
No
room temperature control
Two or more manual stages, no
No
room temperature control
with mechanic thermostat room
Yes
temperature control
with electronic room temperature
No
control
electronic room temperature control
No
plus day timer
electronic room temperature control
No
plus week timer
Other control options (multiple
selections possible)
room temperature control, with
No
presence detection
room temperature control, with open
No
window detection
with distance control option
No
with adaptive start control
No
with working time limitation
No
with black bulb sensor
No
Test Data
Commission Regulation (EC) No 1275/2008 Requirement
Mode
Ecodesign requirements, from 7 January 2013
Off mode
Power consumption in 'off mode':
Power consumption of equipment in any off-mode
condition shall not exceed 0.50 W
Standby mode
Power consumption in 'standby mode(s)':
The power consumption of equipment in any
condition providing only a reactivation function,
or providing only a reactivation function and a
mere indication of enabled reactivation function,
shall not exceed 0.50 W.
The power consumption of equipment in any
condition providing only information or status
display, or providing only a combination of reacti-
vation function and information or status display
shall not exceed 1.00 W.
Seasonal space heating energy efficiency
Description
Seasonal space heating energy efficiency in active mode-η
For electric local space heaters-η
th
The electric to primary energy 'conversion coefficient-CC
F(1) is a correction factor accounting for a positive contribution to the seasonal space
heating energy efficiency of electric storage local space heaters due to adjusted
contributions for options for heat storage and output; and a negative contribution
to seasonal space heating efficiency for commercial local space heaters due to
adjusted contributions for options for the heat output, expressed in %;
F(2) is a correction factor accounting for a positive contribution to the seasonal
space heating energy efficiency due to adjusted contributions of controls of indoor
heating comfort, the values of which are mutually exclusive, cannot be added to
each other, expressed in %;
F(3) is a correction factor accounting for a positive contribution to the seasonal
space heating energy efficiency due to adjusted contributions of controls for indoor
heating comfort the values of which can be added to each other, expressed in %;
F(4) is a correction factor accounting for a negative contribution to the seasonal
space heating energy efficiency by auxiliary electricity consumption, expressed in %;
F(5) is a correction factor accounting for a negative contribution to the seasonal
space heating energy efficiency by energy consumption of a permanent pilot flame,
expressed in %.
Seasonal space heating energy efficiency-η
S
Verdict
Result - Remark
Verdict
0 W
P
N/A
N/A
Value
40
%
S,on
%
100
2.5
%
0,0
%
6,0
%
0,0
0,0
%
%
0,0
%
36,00
P