Canon CN20x50 Series Посібник з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Об'єктив камери Canon CN20x50 Series. Canon CN20x50 Series 33 сторінки. Information display
Також для Canon CN20x50 Series: Посібник із швидкого старту (14 сторінок), Посібник з експлуатації (41 сторінок)
Друкувати сторінку
1 NOMENCLATURE
1 NOMENCLATURE
⑧
⑦
⑥
⑤
④
③
②
①
㉑
⑳
⑲
Information Display (Digital Drive Unit)
For the operation of the digital drive unit, refer to the "Information Display Manual" on the CD-ROM.
⑪
⑨
⑩
⑰
⑱
PL Mount Lens Only
㉓
①
②
③
① Iris Gain Adjusting Trimmer
② Focus Ring A
⑫
③ Focus Ring B
⑬
④ Max. Zoom Speed Adjusting Volume
⑭
⑤ Instant Auto-Iris Switch
⑥ Iris Operation Mode Change-over Switch
⑮
⑦ Zoom Rocker Seesaw
⑯
⑧ RET Switch (Video Return Switch)
⑨ VTR Switch
⑩ AUX Switch
⑪ Flange Back Lock Screw/Flange Back
Adjusting Ring
⑫ Macro Button/Macro Ring
⑬ Extender Switching Lever
⑭ MEMO Switch (Memory Switch)
⑮ Iris Ring
⑯ Zoom Lever/Zoom Ring
⑰ Lens Holder
⑱ Lens Cable Connector (12-pins)
NOTE) PL mount lens only
⑲ Zoom/Focus Remote, Iris Remote,
Virtual Connectors (20-pin)
NOTE) Only connector ★ can be used as the iris remote
or virtual output port.
Use these connectors to connect the control accessory
㉒
(equipped with a 20 pin connector) for zooming or focusing.
Connector ★ has also a function to operate the iris through
a focus control accessory and a dedicated cable and a
function to interface with various virtual systems. It can
output each positioning signal of zoom, focus, and iris.
⑳ Zoom/Focus Operation Change-over Knob
㉑ Hood Lock Knob
㉒ Attachment Holder Contact Plate
㉓ Tie Cable
① Display Switch
Used to turn the display ON/OFF.
② Display
It turns off if left for 2 minutes without operation.
③ Control key
Used to move the cursor up/down/left/right. Press the
center to confirm.
E2