Acer Aspire 6600 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Робочий стіл Acer Aspire 6600. Acer Aspire 6600 24 сторінки. Acer aspire 6600: user guide
Друкувати сторінкуTurning off your Aspire
Option 1: Quickstart OFF • Your Aspire will continue to run
in the Quickstart OFF condition. It will appear that it is OFF.
When you press the power button to switch your Aspire to
the fully ON condition, it will do it in only a few seconds.
Option 2: Traditional OFF • If you want your Aspire to com-
pletely power OFF (if you need to unplug it):
1 • Click on the Windows Start button on the taskbar.
2 • Click on Shut Down.
3 • Click on Shut Down the Computer and click Yes. Your
computer will guide you through saving any open files and
then will shut down Windows Me. Your computer will then
turn off all computer power automatically. You will have to
manually turn off your monitor after you see the computer
power go off.
8
The Mouse
The mouse uses a cursor called a pointer. Pointers come in
many different shapes but are most commonly shaped like an
arrow.
Your mouse has two buttons: a left button and a right button.
Quickly pressing and releasing one of these buttons is called
clicking. Sometimes you will need to double-click–or click the
same button twice quickly.
In this manual, click means to position your mouse point on
an icon and to single click the left button. When a right click is
required, this is stated clearly. Double-click also refers to the
left button.
The ratchet wheel in between the two buttons is added to
provide easier scrolling capability. By simply moving the wheel
with your index finger, you can quicky move through multiple
pages, line, or windows. The wheel may also function as a
third button allowing you to quickly click or double-click an
icon or a selected item
Note: If you are left-handed, please refer to your Windows Me manu-
al for instructions on how to set up your mouse for left-handed use.
Right Button
Ratchet Wheel
Left Button
Caring for
your Mouse
Pointer movement on the
screen is controlled by the
movement of a small ball
on the bottom of the
mouse.
Using a mouse pad under
your mouse will help to
keep the internal parts of
the mouse clean. A dirty
mouse results in jerky
pointer movement and dif-
ficulty getting the pointer
where you want it on
screen.
To clean your mouse:
1 • Turn the mouse upside
down.
2 • Remove the ring holding
the ball in place by turning
it counterclockwise.
3 • Using a lint-free cloth or a
cotton swab dipped in rub-
bing alcohol, clean all mov-
ing parts.
4 • Insert the ball back into
the mouse, making sure to
turn the ring clockwise.
9
An Introduction to Your Aspire