Canon EF-S18-135mm f/3.5-5.6 IS STM Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Об'єктив камери Canon EF-S18-135mm f/3.5-5.6 IS STM. Canon EF-S18-135mm f/3.5-5.6 IS STM 11 сторінок. Efs lens, image stabilizer
Також для Canon EF-S18-135mm f/3.5-5.6 IS STM: Інструкція (14 сторінок), Інструкція з експлуатації (15 сторінок), Посібник користувача (18 сторінок), Посібник (11 сторінок)

Canon EF-S18-135mm f/3.5-5.6 IS STM Інструкція з експлуатації
5

Image Stabilizer

You can use the image stabilizer in AF or MF
mode.
This function provides optimal image stabilization
depending on shooting conditions (such as
shooting still subjects and following shots).
1
Set the STABILIZER switch to
¡If you are not going to use the image
stabilizer function, set the switch to
2
When you press the shutter button
halfway, the Image Stabilizer will
start operating.
¡Make sure the image in the viewfinder is
stable, then press the shutter button the
rest of the way down to take the picture.
¡The Image Stabilizer cannot compensate for a
blurred shot caused by a subject that moved.
¡The Image Stabilizer may not be fully effective if
you shoot from a violently shaking vehicle or
other transportation.
¡The Image Stabilizer consumes more power
than normal shooting, so fewer shots can be
taken if you use the function.
¡When shooting a still subject, it compensates for
camera shake in all directions.
¡It compensates for vertical camera shake during
following shots in a horizontal direction, and
compensates for horizontal camera shake
during following shots in a vertical direction.
.
¡Using a tripod also stabilizes the image.
However, depending on the kind of tripod and
.
shooting conditions, sometimes it may be better
to turn off the Image Stabilizer function.
¡The stabilizer is equally effective for hand-held
photography and photography with a monopod.
¡The image stabilizer function also operates when the
lens is used with an Extension Tube EF12 ll or EF25 ll.
¡If you set the camera's Custom Function to change the
assigned button to operate the AF, the Image Stabilizer will
operate when you press the newly assigned AF button.
ENG-6