Canon PDW-F330 Брошура та технічні характеристики - Сторінка 4
Переглянути онлайн або завантажити pdf Брошура та технічні характеристики для Об'єктив камери Canon PDW-F330. Canon PDW-F330 4 сторінки. Canon camera lens
Друкувати сторінку
The Canon LO-32BMT
The Canon LO-32BMT adapter allows you to mount a 2/3" B4 bayonet lens onto
any Sony 1/2" proprietary mount camera such as the new XDCAM HD series,
PDW-F330/F350 while not affecting the optical quality of the lens. It is important to consider
the following information when using a 2/3" lens with a LO-32BMT adapter mounted to a 1/2" camera.
1. The images produced will appear visually more telephoto by a factor of 1.38x.
2. The actual F-Number of a lens does not change when mounted on a different format size camera.
If the lens is F1.9 in the 2/3" format, the lens is also F1.9 in the 1/2" format.
3. The Focal Length and F-Stop markings on the 2/3" lens are correct in either format.
4. It is highly recommended that HDTV lenses always be employed on HDTV cameras.
Focal Length
When using a 2/3" lens with a LO-32BMT adapter mounted to a 1/2" camera, the actual focal length
of the lens does not change. However, the angle of view associated with that focal length changes.
In this case, the lens will visually be more telephoto, by a factor of 1.38x. As an example, the 2/3"
KJ20x8.5B HDTV lens (58.9
0
appear to have a 44.6
angle of view, that equates to an equivalent focal length of 11.7mm
(8.5mm x 1.38 = 11.7mm)
2/3" HD Lens
KJ20x8.5B Focal Length
at Wide Angle
8.5mm
F-Number
The actual F-Number of a lens does not change when mounted on a different format size camera.
Using the 2/3" KJ20x8.5B HDTV lens as an example, its maximum aperture is F1.8. When that lens is
mounted on the 1/2" camera with the LO-32BMT adapter, the focal length and effective aperture of
the lens do not change.
The formula for deriving the F-Number of any lens is as follows:
F-Number = f / D
f = Focal Length
Since neither the focal length nor the effective aperture has changed, the F-number remains the same,
F1.8. Thus, there is no optical sensitivity "loss" involved when using a 2/3" native lens with the LO-32BMT
on a 1/2" camera. As a comparison, if instead of using the 2/3" KJ20x8.5B lens and LO-32BMT adapter,
you were to substitute a 1/2" KH20x6.4 HDTV lens, the adapter would no long be necessary. By applying
the same formula, F-Number = f/D, to the 1/2" KH20x6.4 lens, the lens will have a faster F-Number, F1.4,
compared to the 2/3" lens and LO-32BMT combination.
Canon USA Inc.
Broadcast and Communications Division
65 Challenger Road, Ridgefield Park, NJ 07660
1-201-807-3300 / 1-800-321-4388
www.canonbroadcast.com
Specifications subject to change without notice. Errors and omissions excepted.
Weight and dimensions are approximate.
CNB3000-00609-78
0
angle of view at 8.5mm when mounted on a 2/3" camera) will visually
2/3" HD Camera
Angle of View
0
58.9
D = Effective Aperture
Visual Equivalent
1/2" HD Camera
Angle of View
Angle of View
with LO-32BMT
0
44.6
KJ20x8.5B LO32BMT
Wide Focal Length: 8.5mm
©2006 Canon U.S.A., Inc. All rights reserved. Canon is a registered trademark of Canon Inc. in the United States
and may also be a registered trademark or trademark in other countries. IMAGEANYWARE is a trademark of Canon.
2/3" HD Camera Angle of View
in 2/3"
11.7mm
1/2" HD Camera Angle of View
with LO-32BMT
2/3" HD Lens
KJ20x8.5B with LO-32BMT
Zoom Ratio: 20x
Wide Focal Length: 8.5mm
F-Stop: F1.8
2/3" Lens
1/2" HD Lens
KH20x6.4
Zoom Ratio: 20x
Zoom Ratio: 20x
Wide Focal Length: 6.4mm
F-Stop: F1.8
F-Stop: F1.4
The 2/3" KJ20x8.5B lens
with LO-32BMT as compared
to the 1/2" KH20x6.4 lens.
0
58.9
0
44.6
1/2"
Lens