COLE CL1350 Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Плоттер COLE CL1350. COLE CL1350 16 сторінок. Cutting plotter

The machine contains six working status: Reset, Online, Offline, Setup,

Offline + Setup and Pause.

1. Reset status

When you turn the power on, the machine can automatically reset.

When it is working, if you press the "reset" key, the machine will return

to reset --- clear up all information, and get ready for new work.

"Welcome to use" will appear on the LCD that means the machine

intend to receive the data from the computer. At the time, the default in

the LCD is as follows:

Baud rate = 9600

b. Cutting speed: 200mm/s; Cutting force: 150g;

Cutting origin is according with the default in the machine

d. Clearing the buffer The above information may be changed

through operation.

2. Online status

After the machine resets, the red light (reset indicator) is on, when the

machine receives data from the computer, the yellow light flash, machine

entered into online status. You can operate as follows:

Change the cutting speed: please press "V+" or "V-" key.

b. Adjust the cutting force: please press the "F+" or "F-" key.

Change the origin: please press "option", and "F+" or "F-",

"V+" or "V-" to move the cutting blade to appropriate position, then repress

"origin", this position will be confirmed as the new work origin. After you

press "Reset" key, machine will work at its default position.

3. Off-line status

Under online status, press "Offline" key, and you'll enter offline status.

The yellow light is on. Meanwhile, "motion" and "X=xxx, Y=yyy" will

appear on LCD, which shows the coordinates location of the blade at

the moment. If the cutting plotter is at work, it will stop working, and the

http://www.cncoletech.cn/

Cole Plotter User Manual

VIII. Operating Instructions