COLE CL1350 Інструкція з експлуатації - Сторінка 14

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Плоттер COLE CL1350. COLE CL1350 16 сторінок. Cutting plotter

Cole Plotter User Manual

XI. Troubleshooting

Artcut software

If you are using Artcut 2005 there should be 2 CD's in the case. The blue

CD that says Artcut 2005 is the one you should install which should be in

English or at least have an option to install in English. At some point in the

install it may ask you to insert the second disk which is the disk with the

Chinese characters that says Artcut graphic disk. That disk is in Chinese

but you only need to insert it briefly so that the install can continue and

you normally will not need to use the Chinese disk again unless you

reinstall the program. Sometimes you maybe encounter a tip saying that

"insert graphic CD" that means that you should insert Graphic CD into CD

Rom of your computer. So Graphic CD is also regarded as a key CD to

Artcut.

Problems Cutting

1.Check to make sure the cables are connected properly

2.Are you using the correct driver in the cutting software?

3.Run a test cut

4.Be sure the pinch rollers are tight enough and placed correctly on

the ends of the vinyl and somewhere in between.

Connectivity Problems

Artcut and most other vinyl / tint cutting software interfaces with the vinyl

cutter directly without using Windows drivers. As such, the settings in

Artcut are critical.

Parallel Port

In most cases the parallel port will work by simply connecting the

http://www.cncoletech.cn/