COLE CL1350 Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Плоттер COLE CL1350. COLE CL1350 16 сторінок. Cutting plotter

1. Adjust the place of pinch-roller according to paper-width.

Cutting plotter has 2 to 4 pinch-roller assemblies (depending on

machine size) and they can be moved on the guide rail. When moving,

please ensure the handle of the pinch-roller is lifted up, then hold the

back of the holder and push it to the left or the right. Do not pull the

roller bar in the front, otherwise the machine precision will be affected.

2. Placement of the pinch rollers:

Pinch-roller is in the place out of the scope of the pattern.

Pinch-roller is 10-50mm away from the edges of paper.

Do not lock pinch roller over a joint on the metal roller.

3. Loading paper

a. Lift the pinch-roller handle and keep it away from the roller.

b. Insert the paper between metal roller and pinch-roller of the

machine from behind to front.

c. Press down the pinch-rollers.

d. If vinyl film is not well placed, a serious deviation will occur.

Please carefully check vinyl before sending a file for cutting. If

vinyl stretches out longer on one side than the other, lift up

pinch-roller on longer side and draw the vinyl back from this side

till both sides of vinyl are on a horizontal line. Press pinch-roller

and try running and adjusting the vinyl several times in this way.

Some vinyl is not originally horizontal or upright, so it is

necessary to run vinyl for enough times to ensure least deviation

before working with it.

http://www.cncoletech.cn/

Cole Plotter User Manual

Loading paper