Canon iR Series Посібник користувача - Сторінка 27

Переглянути онлайн або завантажити pdf Посібник користувача для Програмне забезпечення Canon iR Series. Canon iR Series 46 сторінок. Network scangear

Starting Network ScanGear

Network ScanGear is started by accessing it from a TWAIN-compliant application as follows.

IMPORTANT

•

If you are using Network ScanGear for the ﬁrst time after installing it, the network scanner to be

used must be selected with the ScanGear Tool. For details, see 'Selecting the Network Scanner to

be Used,' on p.3-8.

•

The Network ScanGear driver cannot be started at the same time as the ScanGear Tool. If the

ScanGear Tool is running, close it.

3-10

Switch the scanner online.

For details, see 'Switching the Scanner Online and Ofﬂine,' on p.3-2.

Start the application.

In the application, select Network ScanGear as the scanner to be

used.

In the application, choose the command that selects a scanner (for example, "Select

Scanner", or "Select Source"), then select Network ScanGear in the dialog box that

appears.

After doing this operation once, there is no need to repeat it.

In the application, choose the command that starts scanning

operation (for example, "Scan New" or "Acquire").

The Network ScanGear Main Window appears. Individual items in this window are

explained on the next page.

NOTE

•

See the documentation provided with your application for commands and procedures used to

select Network ScanGear and start scanning.