Canon iR Series Посібник користувача - Сторінка 35

Переглянути онлайн або завантажити pdf Посібник користувача для Програмне забезпечення Canon iR Series. Canon iR Series 46 сторінок. Network scangear

Scanning from the Feeder

When using Network ScanGear to scan with the feeder, you can scan a number of originals

in succession.

Follow the procedure below to scan from the feeder.

IMPORTANT

•

If you are using Network ScanGear for the ﬁrst time after installing it, the network scanner to be

used must be selected with the ScanGear Tool. For details, see 'Selecting the Network Scanner to

be Used,' on p.3-8.

•

Before scanning, you must ﬁrst switch the scanner online. For details, see 'Switching the Scanner

Online and Ofﬂine,' on p.3-2.

•

When scanning from the feeder, use only standard size originals. To scan originals that are not a

standard size, use the platen glass.

4-4

Scanning from the Feeder

Start Network ScanGear from the application.

For details, see the section, 'Starting Network ScanGear,' on p.3-10.

In the Main sheet, select the original sides to be scanned for Original

Placement.

For 1-sided originals, select Feeder (1-sided); for 2-sided originals, select Feeder (2-

sided).

In the Main sheet, click the Orientation button to display the

Orientation dialog box, and set the original feeding direction.

For 2-sided originals, specify the Book Opening direction (i.e. the relation between the front

and back sides).

For details of the setting, see 'Ensuring Scanned Originals are Correctly Oriented,' on p.4-