Canon N1240U - CanoScan Flatbed Scanner Посібник із швидкого старту - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Програмне забезпечення Canon N1240U - CanoScan Flatbed Scanner. Canon N1240U - CanoScan Flatbed Scanner 15 сторінок. Color image scanner
Також для Canon N1240U - CanoScan Flatbed Scanner: Посібник з експлуатації (19 сторінок)
Друкувати сторінку
Using the Scanner Buttons
You can use the 3 convenient buttons on the front of the scanner, to scan and perform
related tasks easily, with a single touch of the button. Place an item on the scanner
before pressing a button.
[SCAN] Button
To Open the scanned image in the
ArcSoft PhotoBase window
1. Press the [SCAN] button.
2. The item is scanned.
3. The scanned image will appear in the
PhotoBase window.
[COPY] Button
To Print (Copy) the scanned image with a
printer
1. Press the [COPY] button.
2. The item is scanned.
3. The scanned image will print.
• The printer driver should be installed and the
printer should be on-line to use this function.
• To use these buttons, ScanGear CS-U, ScanGear Toolbox and ArcSoft PhotoBase should be installed
from the CanoScan Setup Utility CD-ROM.
• While scanning, you can change the default settings for scanning by clicking the [Cancel] button. For
details on changing settings or arranging the scanner's button-to-function assignment, refer to the
ScanGear Toolbox User's Guide (PDF manual).
10
N670U/N676U/N1240U Quick Start Guide
SCAN
COPY
To E-mail the scanned image as an
attached file
1. Press the [E-MAIL] button.
2. The item is scanned.
3. The [E-mail software selection] dialog
appears. Select one from the list and
click [OK].
• Required only for the first scan.
4. The e-mail software will start, and
the scanned image will be attached in
a new message window.
5. Enter the receiver's address, title,
message, confirm the required
settings, and send the message.
• For Windows, MAPI compliant e-mail
software, such as Microsoft Outlook
Express, Microsoft Outlook, Eudora,
should be installed and enabled.
With certain mail software, you should
set the MAPI function on.
E-MAIL