Cole Parmer 1200 Series Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Cole Parmer 1200 Series. Cole Parmer 1200 Series 18 сторінок.

Figure-5

Step 1

Remove 4-position Cuvette Holder Rod. Unscrew the 4-position Cuvette

Holder Rod by turning the knob counterclockwise until it was removed from

the Holder. Gently slide the guide rod out of the Sample Compartment.

Step 2

Locate the Front Screw of the Holder Base. Open the cover of the Sample

Compartment, remove any cuvettes or any breakable items, push in the

Cuvette Holder Rod (black knob) all the way back (the first position is into

the light beam), and locate the Front Screw of the 4-position Cuvette

Holder shown in Figure-6.

Step 3

Remove Front Screw of the Holder Base. Look over the Sample

Compartment, remove the Front Screw.

Step 4

Remove Back Screw of the Holder Base. Place your hand ON TOP of the 4-

position Cuvette Holder and gently slide towards the front. The back screw

is then exposed and can be removed.

Step 5

Take out 4-position Cuvette Holder and insert V-type Tube Holder. Simply

take out the 4-position Cuvette Holder from the V-type Tube Holder and

insert the V-type Tube Holder into it.

Step 6

Install V-type Tube Holder. Locate the Front and Back Screws of the V-

type Tube Holder Base and fasten them.

4-position Cuvette Holder with Base

Figure-6

Changing Cuvette Holders