Daekyung Black Bear DH-050 Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Ланцюгові талі Daekyung Black Bear DH-050. Daekyung Black Bear DH-050 18 сторінок. Chain block
Друкувати сторінку
6. Cautions
6.1 Preliminary Inspection
1) Do not use the hoist if the Safety Latch of hook has been broken/damaged.
2) Safety Latch must be completely closed before use.
3) There should not be any damages or deformation on the hook and chain.
4) All the fixed bolts and nuts should be attached and screwed in tightly.
5) The hook should revolve easily and smoothly.
6) There should not be any dirt or other unusual substances on the hoist.
6.2 Prohibition of Overload
1) Never lift a load that is heavier than the rated capacity of the hoist.
2) Always check for the capacity, written on the name plate of the hoist.
3) All Black Bear hoists are manufactured with consideration of its working area conditions and are tested
with a greater load than its rated safe working load.
4) However, overloading hoists is extremely dangerous as it is considered the same as removing safety
device. ALWAYS operate hoists within the safe working load.
6.3 Safety Latch of Hook
1) When loading the bottom hook, devices like wires and ropes and slings are often used. The Safety
Latch on the hook prevents these other devices to not come off from the hook creating a dangerous
lifting situation. Do NOT detach the Safety Latch from the hook.
6.4 Prohibition of Hoist Remodeling
1) Voluntary remodeling of the hoist by the user is strictly prohibited.
2) Use of this hoist as elevator (for both passenger and freight) is strictly prohibited.
Black Bear is a registered trademark of Daekyung Co., Ltd.
1521-6 Dadae-dong, Saha-gu, Busan, Korea
BLACK BEAR HOIST
- 10 -
Tel: +82)51-264-6611 Fax: +82)51-264-6615