DAELECTRONICS iCtrl-R-mini Посібник з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Обладнання для запису DAELECTRONICS iCtrl-R-mini. DAELECTRONICS iCtrl-R-mini 8 сторінок. Pocket midi controller
Також для DAELECTRONICS iCtrl-R-mini: Посібник з експлуатації (8 сторінок), Посібник з експлуатації (8 сторінок), Посібник з експлуатації (8 сторінок)

DAELECTRONICS iCtrl-R-mini Посібник з експлуатації
Warning and Calibra t ion
Warning: pay much attention when insert and remove your USB cable from the iCtrl-R Mini input. You could damage it irreparably!!!
Calibration: a t the startup, after led check, the controller will start the waiting mode (all red led on).
Pushing button 1 to 4 the related performance will be activated or holding button 1 for one second the calibration mode will be activated (blue led
led blinking)
Before you start using the Expression pedal (the pedal shall ALWAYS be disconnected / connected to the controller before energizing the controller
itself)
Immediately after entering the calibration mode, depress the pedal backwards to the minimum heel setting then sweep to the maximum toe
setting, this will ensure you calibrate your pedal with the
Now pressing one of the switches of
next calibration .
Performance 1
Holding for 2 second button 1 while other performance are activated performance 1 will be activated (led 1 blinking and all other leds off) . You
can now select between 4 slots pushing one of the controller buttons (the related red will switch on while led 1 will still blink) .
You can send control changes to switch on/off effects inside the slots as follows:
control change 01 > long click and release of switch 1 > blue led 5 on > cc 17
control change 02 > long click and release of switch 2 > blue led 6 on > cc 18
control change 03 > long click and release of switch 3 > blue led 7 on > cc 22
control change 04 > long click and release of switch 4 > blue led 8 on > cc 26
3
iCtrl
iCtrl- - R mini
R mini
the related performance mode will be selected. The calibration values will be stored until the
iCtrl- - - - R mini
iCtrl
iCtrl
R mini
R mini
2