DOREMIDI MTC-10 Інструкція - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція для Кабелі та роз'єми DOREMIDI MTC-10. DOREMIDI MTC-10 5 сторінок.

1. Introduction

The MIDI to LTC box (MTC-10) is a MIDI time code and SMPTE LTC time code

conversion device designed by DOREMiDi, which is used to synchronize the time of MIDI

audio and lighting. This product has a standard USB MIDI interface, MIDI DIN interface and

LTC interface, which can be used for time code synchronization between computers, MIDI

devices and LTC devices.

2. Appearance

❶ LTC IN: Standard 3Pin XLR interface, through the 3Pin XLR cable, connect the device

with LTC output.

❷ LTC OUT: Standard 3Pin XLR interface, through the 3Pin XLR cable, connect the device

with LTC input.

❸ USB: USB-B interface, with USB MIDI function, connected to a computer, or connected

to an external 5VDC power supply.

❹ MIDI OUT: Standard MIDI DIN five-pin output interface, output MIDI time code.

❺ MIDI IN: Standard MIDI DIN five-pin input port, input MIDI time code.

❻ FPS: Used to indicate the current number of frames transmitted per second. There are

four frame formats: 24, 25, 30DF, and 30.

❼ SOURCE: Used to indicate the input source of the current time code. The input source

of the time code can be USB, MIDI or LTC.

❽ SW: Key switch, used to switch between different time code input sources.