Asus AAEON UP-POE01 Посібник користувача - Сторінка 20
Переглянути онлайн або завантажити pdf Посібник користувача для Материнська плата Asus AAEON UP-POE01. Asus AAEON UP-POE01 21 сторінка. Up poe hat maker board
Друкувати сторінку
3.1
Block Diagram
3.2
Installation Guide
This section details how to connect the UP POE HAT Board with your UP Main Board.
UP POE HAT can be used with UP Board or UP Squared.
1.
Connect Main Board (MB) and POE board through 40-pin HAT connector.
2.
Use standoffs and screws in accessory kit to secure the boards together.
3.
Connect LAN1 on PoE to LAN port on MB with LAN cable in accessory kit.
4.
To power the system with PoE, connect a 37~65W PoE power supply to the RJ45
PoE Port (LAN Input POE1) circled in the following picture.
Chapter 3 – Drivers Installation
9