Asus AT3IONT-I Series Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Материнська плата Asus AT3IONT-I Series. Asus AT3IONT-I Series 48 сторінок. Asus computer hardware
Також для Asus AT3IONT-I Series: (Французькою мовою) Короткий посібник для початківців (28 сторінок)
Друкувати сторінку
Chapter 1
Product introduction
Thank you for buying an ASUS
Before you start installing the motherboard, and hardware devices on it, check the items in
your motherboard package. Refer to page ix for the list of accessories.
• AT3IONT-I Series motherboards include AT3IONT-I and AT3IONT-I DELUXE two
models. The package contents vary from models.
• If any of the items is damaged or missing, contact your retailer.
1.1
Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due to
static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so may
cause severe damage to the motherboard, peripherals, or components.
Onboard LED
The motherboard comes with a standby power LED that lights up to indicate that the system
is ON, in sleep mode, or in soft-off mode. This is a reminder that you must shut down
the system and unplug the power cable before removing or plugging in any motherboard
component. The illustration below shows the location of the onboard LED.
AT3IONT-I SERIES Onboard LED
1-1
AT3IONT-I Series motherboard!
®
SB_PWR
ON
OFF
Standby Power
Powered Off