daewon DIB-B850 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Сантехніка для ванної кімнати daewon DIB-B850. daewon DIB-B850 19 сторінок.

Друкувати сторінку

Expert mode

Expert mode allows the user to program the operations. It may be complicated for regular

users.

Entering & canceling Expert mode

Select and hold Nozzle Cleaning for 2 seconds while

Stop is selected and held to enter/cancel the expert

mode.

Nozzle Cleaning LED blinks to indicate Expert mode has

been entered.

The seat sensor is automatically overridden and, if the

overriding is not canceled forcibly, it is canceled after

20 minutes automatically.

Seat occupy sensor overriding and canceling

After entering Expert mode, touch a seat sensor area

to deactivate the seat sensor override. 5 LEDs of water

pressure/nozzle position are turned off to indicate that

the seat sensor override is deactivated.

Touch the seat sensor again to activate the seat sensor

override. 5 LEDs of water pressure/nozzle position turn

on to indicate that the seat sensor override is activated.

Wash cycle change

Deactivate the seat sensor override.

Select Water temperature while Rear wash is selected

and held.

Color of Water temperature LED is changed sequentially.

1min(off) → 2min(low/Green blinks) → 3min(medium/

yellow blinks) → 5min(high/red blinks).

Cycle of front wash and Turbo wash can be changed in

the same way.

Default cycle is 2 minutes.

Expert mode

기본기능

Dry cycle change

Deactivate the seat sensor override.

Select Water temperature while Dry is selected and

held.

Color of Water temperature LED is changed sequentially.

1min(off) → 2min(low/Green blinks) → 3min(medium/

yellow blinks) → 5min(high/red blinks).

Default cycle is 3 minutes.

2 seconds

Child wash cycle change

Deactivate the seat sensor override.

Select Water temperature while Child wash is selected

and held.

Color of Water temperature LED is changed sequentially.

30sec(off) → 60sec(low/Green blinks) → 120sec(medium

/yellow blinks) → 180sec(high/red blinks)

30sec(off) : 10sec front wash → 10sec front oscillating

wash → 10sec front oscillating/pulsating wash

60sec(off) : 20sec front wash → 20sec front oscillating

wash → 20sec front oscillating/pulsating wash

120sec(off) : 40sec front wash → 40sec front oscillating

wash → 40sec front oscillating/pulsating wash

180sec(off) : 60sec front wash → 60sec front oscillating

wash → 60sec front oscillating/pulsating wash

Default cycle is 60 seconds.

Dry cycle change at Child wash

Deactivate the seat sensor override.

Select Seat temperature while Child wash is selected

and held.

Color of Seat temperature LED is changed sequentially.

30sec(off) → 1min(low/Green blinks) → 2min(medium/

yellow blinks) → 3min(high/red blinks).

Default cycle is 2 minutes.