DORIC Optogenetics TTL Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Генератор імпульсів DORIC Optogenetics TTL. DORIC Optogenetics TTL 11 сторінок.

2.1.1 Channel conﬁguration

The Channels conﬁguration window is used to conﬁgure each channel. The window can be accessed by either using the

Add channel or Edit buttons. This window is separated into multiple boxes, deﬁned here.

1. The Channel Options (Fig. 2.2) include the Channel drop-down list and the channel Mode list.

a) The Channel identiﬁes which of the 4 channels available for each channel type is currently being modiﬁed.

The channel can be changed by selecting a new one from the drop-down list.

b) The Mode identiﬁes the type of signal sent.

• The CW(Continuous Wave) channel mode allows the creation of a continuous TTL pulse sequence. The

following elements appear in the Sequence Options box.

i. The Starting Delay (Fig. 2.2) deﬁnes the time between the activation of the pulse sequence and the

beginning of the signal.

ii. The Time ON (Fig. 2.2) deﬁnes the length of time the continuous signal is active. Should the time

chosen be 0, the signal will continue until the pulse sequence is stopped manually.

iii. The Total Duration (Fig. 2.2) shows the total expected duration of the pulse sequence. Should the

duration be inﬁnite, the box will display

display N/A.

Chapter 2. Operations Guide

Figure 2.2: Channels Conﬁguration, Continuous Wave Interface

. If there is an error in parameter selection, this box will