DORIC OTPG 4 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Генератор імпульсів DORIC OTPG 4. DORIC OTPG 4 16 сторінок. Optogenetics ttl pulse generator
Друкувати сторінку2.1.2 Channel Options Section
The Channel Option section is separated in 2 sub-section, the OTPG Options section that de nes the channel and its
mode and the Trigger Options section that control the trigger method of the selected channel. The Trigger Options
are not available when the channel is in Input mode.
OTPG Options
1. The Channel eld identi es which of the available channels is currently being modi ed. The channel can be
changed by selecting a new one from the drop-down list.
2. The Mode eld identi es the type of signal sent. Three modes are available, CW (Continuous Wave), Square,
and Input mode. Each mode enables di erent options of the Sequence Option section that are explained in
more detail in section 2.1.3.
3. The Inverted Output checkbox reverse the signal output. When selected, the ON TTL signal will send 0 V, while
the OFF TTL signal will send 5 V.
Trigger Options
4. The Source trigger option allows to chose between a Manual Trigger (activated by the user) or an Input trigger,
which is coming from a channel input.
5. The Type de nes the type of trigger that is used to start/stop a sequence. The Triggered type can starts and
stops a sequence at a rising edge while the Gated type can starts the sequence at a rising edge and stops it at a
falling edge. A more re ned interaction of the trigger with the de ned sequence can be set up using the Mode
eld. Not all Trigger Type are available for each combination of Trigger Mode and Repeatability. The di erent
combinations are shown in Figure 2.8.
Chapter 2. Operations Guide
1
2
3
4
5
6
7
8
Figure 2.3: Channel Options of the Channel Con guration Window.
6