Canon LV-5200 Посібник користувача - Сторінка 20

Переглянути онлайн або завантажити pdf Посібник користувача для Проектор Canon LV-5200. Canon LV-5200 48 сторінок. Canon lv-5200: user guide
Також для Canon LV-5200: Брошура та технічні характеристики (2 сторінок)

Друкувати сторінку

1. Connecting to Computer

BASIC OPERATION

Press the ZOOM button on the Top Control or the ZOOM L/M

button on the Remote Control Unit. The message "Zoom" is

displayed.

Press the ZOOM L button or the POINT UP button to make the

image larger, and press the ZOOM M button or the POINT

DOWN button to make the image smaller.

Press the FOCUS button on the Top Control or the FOCUS L/M

button on the Remote Control Unit. The message "Focus" is

displayed.

Adjust the focus of the image by pressing the FOCUS L/M

button or the POINT UP/DOWN button(s) .

If the projected picture has keystone distortion, correct the image with KEYSTONE adjustment.

Press the KEYSTONE button on the Remote Control Unit or

select Keystone on the SETTING menu. (Refer to page 36.)

The keystone dialog box appears.

Correct keystone distortion by pressing the POINT UP/DOWN

button(s) on the Top Control or on the Remote Control Unit.

Press the POINT UP button to reduce the upper part of the

image, and press the POINT DOWN button to reduce the lower

part.

Reduce the upper width

with the POINT UP button.

Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen. To cancel the FREEZE function,

press the FREEZE button again or press any other button.

ADJUSTING THE SCREEN

ZOOM ADJUSTMENT

FOCUS ADJUSTMENT

KEYSTONE ADJUSTMENT

PICTURE FREEZE FUNCTION

Zoom

Message disappears after 4 seconds.

Focus

Message disappears after 4 seconds.

• The arrows are blue in no correction.

• The arrow of direction being corrected turns light

blue.

• The arrow disappears at the maximum correction.

• If you press the KEYSTONE button on the Remote

Control Unit once more while the keystone dialog

box is being displayed, the keystone adjustment will

be set into no correction.

Reduce the lower width with

the POINT DOWN button.