Canon LV-5200 Посібник користувача - Сторінка 40
Переглянути онлайн або завантажити pdf Посібник користувача для Проектор Canon LV-5200. Canon LV-5200 48 сторінок. Canon lv-5200: user guide
Також для Canon LV-5200: Брошура та технічні характеристики (2 сторінок)
Друкувати сторінку
APPENDIX
The Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most Personal
Computers. The POINT buttons and two CLICK buttons are used for wireless mouse operation.
This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen. When the ON-
SCREEN MENU or any message / dialog box is displayed on the screen instead of PC mouse pointer, this Wireless Mouse
function cannot be used.
To use the Remote Control Unit as Wireless Mouse for a Personal Computer, installation of the mouse driver (not supplied)
is required. Make sure that the mouse driver is properly installed in your computer and that the mouse port (or USB port) of
your computer is activated.
1
Connect the mouse port (or USB port) of your computer to
Control Port (or USB connector) of this projector with the Control
Cable (or USB cable). (Refer to page 11, 12 for connection.)
2
Turn the projector on first, and then turn on your computer.
When the computer is switched on first, Wireless Mouse may not
work properly.
When controlling a PC mouse pointer, operate Wireless Mouse with the POINT button, SET button, and RIGHT CLICK
button on the Remote Control Unit.
POINT button
Used to move PC mouse pointer.
corresponding with the direction you are pressing.
SET (LEFT CLICK) button
This button has the same function as the left button in a PC mouse.
RIGHT CLICK button
This button has the same function as the right button in a PC mouse.
This button is not available for controlling this projector.
40
OPERATING WIRELESS MOUSE
INSTALLATION
OPERATING WIRELESS MOUSE
The pointer is moved
Note : When your computer has no mouse
port, connect the Serial Port of your
computer to the Control Port of the
projector with the Control Cable for the
Serial Port (not supplied).
POINT button (Move the pointer)
SET button
RIGHT CLICK button
(left button of the
(right button of the mouse)
mouse)