Canon LV-5220 - Multimedia Projector SVGA Функціональна специфікація - Сторінка 17
Переглянути онлайн або завантажити pdf Функціональна специфікація для Проектор Canon LV-5220 - Multimedia Projector SVGA. Canon LV-5220 - Multimedia Projector SVGA 20 сторінок. Multimedia projectors
Також для Canon LV-5220 - Multimedia Projector SVGA: Функціональна специфікація (42 сторінок), Технічні характеристики (6 сторінок)
Друкувати сторінку
Basic Serial Command Functional Specification
7. State Read Command
7.1. Format
7.1.1. PC issues commands fin format as below.
"CR" COMMAND [CR]
Command: 1 character (See Status Read Command Table)
7.1.2. When a Projector receives the appropriate command, it returns a character line as the required
data.
Required Data [CR]
Required Data: A character line (See Basic Status Read Command Table)
7.1.3. When receiving data cannot be decode, the Projector returns, "?" [CR].
7.2. Transfer Example
Get input mode for the Projector by basic commands.
PC → Projector
Projector → PC
7.3. Status Read Command
Command
"CR0" [CR]
Detail
Get the Projector status
Acceptable
Response
Unacceptable
{Details for Response}
7.3.1. "00" [CR]
Status: Power On
The image is displayed normally.
7.3.2. "80" [CR]
Status: Standby
When the status is Standby, Status Read Commands are always acceptable, but Functional
Execution Commands are not acceptable except Power On
Command (current input mode command issue)
"C"
"R"
"%1" [CR]
"00" = Power On
"80" = Standby
"40" = Processing Count down
"20" = Processing Cooling down
"10" = Abnormal Power
"28" = Processing cooling down due to abnormal temperature
%1
"08" = Abnormal Temperature
"88" = Normal after recovering abnormal temperature
"02" = Cannot accept RS232C command
"24" = Processing Power Save・Cooling Down
"04" = Power Save
"?" [CR]
"1"
CR
Response
(A few ms - 1s)
(Shows Computer 1 is selected)
Command.
Page 16 of 19
"1"
CR