Canon LV-7210 - XGA LCD Projector Специфікація - Сторінка 8

Переглянути онлайн або завантажити pdf Специфікація для Проектор Canon LV-7210 - XGA LCD Projector. Canon LV-7210 - XGA LCD Projector 22 сторінки. Mounting hanger for low ceilings
Також для Canon LV-7210 - XGA LCD Projector: Специфікація (47 сторінок), Брошура та технічні характеристики (2 сторінок), Посібник зі збирання та встановлення (японською мовою) (8 сторінок)

Basic Serial Functional Specification for LV-5210/7215/7210

Functional Execution Command Table

6.1 Format

6.1.1

PC issues a command as below format

"C" COMMAND [CR]

Command: 2 characters (See Functional Execution Command Table)

6.1.2

A projector changes received data to decode and sends a return result after being

ready to receive next command.

[ACK] [CR]: (0x06、0x0D)When received functional execution commands.

6.1.3

"?" [CR]: When cannot read received data

When some functions need command pipelining , the performance is the same as the remote

control's performance.

1. System: issue any commands every 100ms after receiving response

2. When receiving the same command continuously with 120ms, the function is

Change to Video mode with Basic Command

PC → Projector

Projector → PC

executed for 120ms from that moment.

When receiving the same command continuously, with 120ms, the function

is executed for 120ms form the moment.

The next command is not issued after 120ms, and the execution is stopped.

If the projector receives other incoming commands within 120ms, the

execution is stopped.

Command

"C"

"0" "7" CR

Processing

(A few - 5s)

ACK

Page