Canon LV-7345 Посібник користувача - Сторінка 24

Переглянути онлайн або завантажити pdf Посібник користувача для Проектор Canon LV-7345. Canon LV-7345 44 сторінки. Ultra-portable multimedia projector
Також для Canon LV-7345: Брошура та технічні характеристики (6 сторінок), Інструкція зі збирання та встановлення (2 сторінок), Брошура та технічні характеристики (2 сторінок)

COMPUTER INPUT

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your

computer. Auto PC Adjustment function can be operated as follows.

Auto PC Adj.

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to PC

ADJUST Menu icon.

Press POINT DOWN button to move a red frame pointer to

AUTO PC Adj. icon and then press SET button twice.

This Auto PC Adjustment can be also executed by pressing

AUTO PC ADJ. button on Remote Control Unit.

Store adjustment parameters.

Adjustment parameters from Auto PC Adjustment can be memorized

in this projector. Once parameters are memorized, setting can be

done just by selecting Mode in PC SYSTEM Menu (P22). Refer to

step 3 of MANUAL PC ADJUSTMENT section (P26).

NOTE

Fine sync, Total dots and Picture Position of some computers can

not be fully adjusted with this Auto PC Adjustment function. When

the image is not provided properly through this function, manual

adjustments are required. (Refer to page 25, 26.)

Auto PC Adjustment function cannot be operated when "RGB,"

"720p (HDTV)," "1035i (HDTV)" or "1080i (HDTV)" is selected on PC

SYSTEM Menu (P22).

PC ADJUSTMENT

PC ADJUST MENU

Move a red frame pointer to AUTO PC Adj.

icon and press SET button.

PC ADJUST Menu icon