Canon LV-7565 Специфікація - Сторінка 8

Переглянути онлайн або завантажити pdf Специфікація для Проектор Canon LV-7565. Canon LV-7565 47 сторінок. Multimedia projectors
Також для Canon LV-7565: Брошура та технічні характеристики (6 сторінок), Брошура (6 сторінок), Технічні характеристики (6 сторінок)

Expand Serial Command Specification

3. Note for Communications

3.1. The expand command is defined one command / one line that starts "C" and ends carriage return

(0x0D).

3.2. When a projector receives carriage return (0x0D), it starts decoding.

3.3. There are two type of Expand Serial Command, Functional Execution Commands and Status Read

Command.

*Functional Execution Command

"CF_BRIGHT_032" [CR]

Note) _ means a space

*Status Read Command

"CR_RIGHT" [CR]

3.4. When it takes more than one second to receive one Command, it clears information of buffer.

(Until the projector receives the carriage return since the projector has received the first data)

3.5. A projector sends a return command in a few ms to 8000ms after the projector has received the

command.

When the computer keeps sending some commands, it must wait sending next

command until the projector has received the response. In short, make sure that the projector

sends a return command, and then the computer can send next command.

PC ! Projector

Projector ! PC

When a computer issues next command before receiving a return command, the projector may

not operate properly. Command processing may not be accepted before the current command

processing has not done.

Command

"CF_BRIGHT_032"

[CR]

"000"

Command processing

(a few ms - 8000ms)

Page 7 of 46

[CR]

Response