Akyga AK-BC-01 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Зарядний пристрій Akyga AK-BC-01. Akyga AK-BC-01 4 сторінки. Microprocessor battery charger

Друкувати сторінку

AK-BC-01 - user manual

The II protection class device. It provides protection against electric shock against direct and

indirect contact, and thanks to the additional isolation it is not necessary to connect the device

case with the protective earth conductor.

The device is intended only for domestic use, indoors.

Safety Precautions

WARNING! Product heats up during operation. To reduce the risk of burns or overheating the power

supply, do not place it in restricted ventilation area. Also, do not allow the working charger to touch soft

surface such as pillows, blankets or clothing. The battery charger meets the limits on the surface

temperatures available to the user, as defined in the International Standard for Safety of Information

Technology Equipment (IEC 60950).

An electrostatic discharge occurs when two object touch each other, for example, an electric

charge that occurs when user touch metal door handle after walking on a carpet . Discharging

electrostatic charges from fingers or other electrostatic conductors can damage electronic

components. To avoid damaging the batteries, abstain from touching electrical outlets, wires and

electonic circuits. The user's contact with electronic components should be kept to a minimum.

The manufacturer of the product is not responsible for damage or insults caused in effect

of disobey the safety instructions and informations contained in these user manual.

Keep the product and the packaging out of range of children and animals. The package

includes a foil that child could choke while playing.

It is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or

crushing may cause its damage.

The product operation in adverse conditions is not allowed. Adverse conditions are primarily:

exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high

humidity, surrounds of gases, dusts or flammable and aggressive liquids.

If the product has been damaged, does not work properly or has been stored for a long period

of time in bad or unfavorable conditions, safe operation of the device is not possible. It is

essential to stop using the product and to protect it against re-use for security purposes.

Product and power cord should not be touched with moist or wet hands under no

circumstances.

Short-circuiting the current connection is prohibited.

Make sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or

mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away

from heat sources (such as stoves, radiators, fireplaces).

Power cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.

It is forbidden to modify the power cord. In the case of modifications, the cable may be

damaged, causing threats to life, health and property.

It is forbidden to charge other types of batteries than AA/AAA, because it can cause explosion,

electric shock and personal injury.

Before connecting the charger to the mains socket, make sure that the voltage specified on the

charger matches voltage supplied to the household socket.

Connection of the charger to electricity is done by connecting added cable with the IEC C7 plug

to charger with IEC C8 connector and then connecting appropriate plug to grounded electrical

outlet.

Mains plug should be disconnect from power socket if the product is not in use for a long time.

When disconnecting the power cord from the socket and from the device, do not pull on the

cord, but only on the part of the cable plug provided for this purpose.

p. 2