bolle SAFETY B810 Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Засоби безпеки bolle SAFETY B810. bolle SAFETY B810 2 сторінки.

Друкувати сторінку

B810

PURE PROTECTION

MODEL

VERSIONS

Translucent grey

B810

LENS MARKING

• Crown = Manufacturer Mark

• Z87+ = Impact rated for Plano product - tested and approved

to ANSI Z87-2+

CORRECTED BASE:

Corrected base : 4

PACKAGING AND EAN13 CODE

PXFB8102042

Per piece

3660740010027

WARNING: Reproductive Harm – www.P65Warnings.ca.gov

Bollé Safety-USA

2810 Caribou Court, Suite 160

Carlsbad, CA 92010

USA

bollesafety-usa.com

REFERENCES

PXFB8102042

and black

Translucent grey

PXFB810204R

and black

PXFB810204R

3660740010034

SIZE

FRAME MARKING

52/17

Z87-2+

54/17

Z87-2+

FRAME MARKING

• Crown = Manufacturer Mark

• Z87+ = Impact rated for Plano product - tested and approved

to ANSI Z87-2+

• Splash/droplet protection = D3

• Nuisance Dust protection = D4

• Fine Dust protection

• Country of origin = Taiwan

ANSI: guaranteed minimum resistance of the protective eyewear against

everyday risks including dropping the protective eyewear onto the ground,

ageing by light exposure, exposure to heat or corrosion etc.

Maximum protection for glasses. Use for high speed

particles at extreme temperatures.

Bollé Safety product approval certificates to ANSI standards

will be sent on request.

CLEANING AND STORAGE

CLEANING : The lenses should be cleaned regularly. Bollé Safety recommends only using

the B-clean lens cleaning system.

MAINTENANCE : Pitted, scratched or damaged lenses must be replaced by replacing the

complete product. If the frame is damaged also replace the complete product. After each

use it is recommended to keep the spectacles or goggles in a microfiber pouch or rigid case.

STORAGE : All products must be stored in a dry and clean environment.

FRAME MATERIAL

TEMPLE LENGTH

133 mm

= D5

CHARACTERISTICS

TR90 - Metal - Nylon

11/01/2020