DORMA-Glas UNIQUIN Інструкція з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Внутрішнє оздоблення приміщень DORMA-Glas UNIQUIN. DORMA-Glas UNIQUIN 20 сторінок.

Друкувати сторінку

DORMA-Glas

Installation preparation

CAUTION

Risk of injury due to sharp edges.

Contact with cut edges can lead to cuts.

• Wear protective gloves.

• Deburr cutting edges.

• Blunt the cut edges, e.g. with silicone.

• Secure cut edges against contact.

5.1

Tools for mounting

• Straight and miter saw

• Torx angle screwdriver

• Spirit level

• Hexagon socket set

• Drilling machine

• Vacuum lifting tool

• Wooden blocks

• Torque wrench

• Knife or scissors

5.2

Maintain the unit alignment

The product has no fixed outside or inside and can be mounted

aligned on both sides.

• Check assembly location on site, e.g. in the building floor plan.

• Check the escape direction on site and compare it with the

project-related unit drawing.

• Check the opening direction of swing doors on site and compare

them with the project-related unit drawing.

• Consider the direction of other components (optional) e.g.

sliding door or acoustic element according to the project-related

unit drawing.

• Determine the direction of the unit according to the on-site

check and according to the project-related unit drawing and

adjust the mounting accordingly.

5.3

Specifications for joint mounting

• Corner fittings directly adjacent to doors are not possible.

• The cutting is done by the customer.

• Recommendation: Order the profiles in excess length.

• With T-joints and corner joints, the same or different glass

thicknesses can be mounted at the same profile height.

• A T-joint can only be mounted at a 90° angle.

UNIQUIN Mounting profile

WN 059546 45532

5.3.1

Prepare inside T-joint

Fig. 10

Inside T-joint on the side of the cover profile

46 (55)

Fig. 11

Example of a mounting with inside T-joint

Base profile 1

Base profile 2

Cover profile 1

Cover profile 1.1

Cover profile 1.2

Cover profile 2

Glass thickness

Installation preparation

2023-08 / 16676