CANOPY STAR CNP4-50 Series Посібник з монтажу
Переглянути онлайн або завантажити pdf Посібник з монтажу для Ліхтар CANOPY STAR CNP4-50 Series. CANOPY STAR CNP4-50 Series 8 сторінок.
Друкувати сторінкуWARNING
The installation must only be performed by a licensed electrician.
l
To prevent death, injury or damage to property, this product must be installed in accordance to National
l
Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA22.1) in Canada.
Disconnect power before installing the product or servicing it.
l
Wait until fixture has cooled down before installing or servicing the fixture.
l
MIN. 90°C SUPPLY CONDUCTORS
l
MODEL NUMBERS
This installation instructions covers the following products:
Power Supplies
1. 96W Power Unit: PUC-UNV1-3570 or PUC-UNV2-3570
2. 100W Power Unit PUC-UNV1-4100 or PUC-UNV1-4100DM or PUC-UNV2-4100DM
3. 192W Power Unit: PUC-UNV1-7140 or PUC-UNV2-7140
4. 200W power Unit: PUC-UNV1-8200 or PUC-UNV1-8200DM or PUC-UNV2-8200DM
Luminaires
1. CNP1-50 Series Luminaire
2. CNP2-50 Series Luminaire
3. CNP3-50 Series Luminaire
4. CNP4-50 Series Luminaire
BOX CONTENTS
Mounting Plate Assembly
Wire Harness/Cover
Assembly
US LED
| 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | [email protected] | www.usled.com
INSTALLATION GUIDE
CNPx-50
Tools Needed
1. 4" Hole Saw
2. #2 Phillips Screw Driver
3. ¼" Hex Driver
CanopyStar Fixture
LED Driver with Mounting Bracket
sold separately not included in
the box
Updated 04.20.18
Page 1
#44-000017