Cansec MAP1 Конфігурація - Сторінка 6

Переглянути онлайн або завантажити pdf Конфігурація для Контролер Cansec MAP1. Cansec MAP1 12 сторінок.

5. Double click on one of the detected controllers or select it and click Configure. For

static IP address setting unselect Enable DHCP and consult with IT personnel

before entering the IP address, Subnet Mask, Gateway IP Address and Port numbers.

Select Enable DHCP if static IP address is not required.

Note: The optional Trusted Host IP can be entered to instruct the controller to accept data

connection (server port 5000) only from the host computer having the

Express

software installed. Other connections for diagnosing and updating are not

limited by this Trusted Host IP and can be connected from any host. If you have an old

firmware, please contact Cansec support.

6. The factory default or current password for a new un-configured MAP1 controller is

Cansec. The password must be changed to something else other than Cansec.

7. Click Save. The controller saves the new settings and reboots for the settings to take

effect.

MAP1 IP Configuration

First Access

Page 6 of 12

July 2021 • Rev. 1.2