Bolton Tools CS 250 Посібник з експлуатації - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Пила. Bolton Tools CS 250. Bolton Tools CS 250 20 сторінок.

1.3 Guarantee

Defects to goods delivered of which can be proved that they have occurred within 6

months of delivery as a result of an incorrectness in the design or of faulty finish or use

of bad materials will be repaired by us free of charge. Claims about externally noticeable

faults are to be put in at the time of testing or inspection in our factory resp. at the latest,

or in case no test or inspection takes place in our factory, within two weeks after

reception of the goods. If this period is exceeded all claims relating to the faults

concerned will expire. Claims about faults which are not externally noticeable are to put

in as soon as possible, however, not later than two weeks after expiry of the period of

guarantee. If this period is exceeded all claims relating to the faults concerned will expire.

The purchaser's appeal for guarantee does not relinquish his contractual obligations

towards us. As long as the purchaser does not fulfill his contractual obligations towards

us we deny our obligation to render guarantee.

3. Description of machine

The machine is standardly equipped with a machine base with incorporated

cutting oil tank and pump.

The machine is fitted with a tolerance-free long-life worm and worm wheel.

The worm gear runs in an oil bath case and is virtually maintenance-free.

The machine is fitted with a single material vice.

4 Installation

4.1 Installation and mounting

Unpack the machine.

• Determine where the sawing machine will be placed. In doing so take into

account the feed and discharge of materials, optional built-on accessories,

maintenance and repairs.

• Place the saw unit - if necessary by means of hoisting equipment – on the

machine base (cover at the rear) and attach each other.

• Secure the machine to the floor. The necessary holes have already been made

in the machine base.

Fig. 2.01