Dormakaba ED connection board CAN Інструкція з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Блок управління Dormakaba ED connection board CAN. Dormakaba ED connection board CAN 16 сторінок.
Друкувати сторінкуAssembly Instruction
1 Information about this document
1.1 Contents and purpose
This document describes the mounting and connection of the ED connection
board CAN to an ED100/250 operator.
1.2 Target group
The product may only be mounted and commissioned by a qualified electrician.
1.3 Other applicable documents
•
Mounting and commissioning ED 100/250
•
Radar sensor M A01 mounting instructions
1.4 Abbreviations
Abbreviation
ED 100/250
1.5 Symbols used
1.5.1 Hazard category
NOTICE
Means a potentially harmful situation where the product or
something in its environment could be damaged or result in
malfunction.
2 Safety
WARNING
Danger due to failure of protective and safety equipment
The cable routing connects the installed components with each other.
Unprotected cable routing can lead to tampering or malfunctions.
•
Lay cables either flush-mounted or
•
surface-mount the cables in the steel hose
NOTICE
Material damage due to electrostatic discharge
The component can be damaged by electrostatic discharge!
•
Ground your body before touching the component.
•
Use ESD safe tool.
060636 45532/16923 - 2023-04
Definition
Electromechanical swing door operators for the
automatic opening and closing of swing doors.
Information about this document
ED connection board CAN
3