Battery Fighter BCA1102S6WR Інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Зарядний пристрій Battery Fighter BCA1102S6WR. Battery Fighter BCA1102S6WR 8 сторінок. Intelligent battery charger for both 6v & 12v lead acid automotive batteries
Друкувати сторінку1. Qualification Phase:
Initially ensures the battery is in good condition prior to launch of normal charge processes, as a safety measure charge processes
will not begin if battery is below 3 volts.
2. Bulk Charge Phase:
Bulk Charge phase gives the battery constant current, taking the battery up to 80% of its full capacity.
3. Absorption Phase:
In the Absorption phase the battery is given constant voltage while current is reduced based on actions taken from ongoing battery
monitoring until the battery is 100% charged.
4. Full Charge / Maintenance:
The battery can be left safely connected to the charger indefinitely. The charger will constantly monitor the battery and "turn-on" again
as needed to maintain the battery at a full state of readiness.
Technical Specifications:
Model: BCA1102S6WR
Input: Auto-switching 100V- 240VAC
Output: 12VDC 1A, 6VDC 1A (Lead Acid)
Max Charge Current: 1A
Max. Voltage: 14.8V（Lead –Acid (Pb) Battery charging）
Overcharge Protection: Yes
Short Circuit Protection: Yes
Spark Proof: Yes
Overload Protection: Yes
Reverse Polarity Protection: Yes
Over Heat Protection: Yes
*Battery Capacity: Charging LEAD ACID - 12V 1A (MAX. 40 Ah); 6V 1A (MAX. 40Ah)
BCA1382S6WR - 140728
4 Stage Lead Acid Charge & Maintenance Process ( 6V Batteries )
50/60Hz