BATTERY LINK DBDC10 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Зарядний пристрій BATTERY LINK DBDC10. BATTERY LINK DBDC10 13 сторінок. Dc to dc dual battery charger

Друкувати сторінку

Operating the Charger

Once correctly installed the Battery Link DC-DC charger is a simple set and forget dual battery

switch.

• Start the vehicle and let it idle.

• The charger will now recognize that there is charge being applied to the main starting battery.

• Once the main starting battery has reached 12.8 volts the charger will automatically turn on.

• Once the voltage reaches 13.4 volts the charger will begin to charge the auxiliary battery.

• The initial default setting is for lead acid batteries.

• If you are charging a battery with a different chemistry simply change the battery type by pressing

the battery type selector button on the front of the charger.

• Once selected, the charger will remain on this battery type until it is changed.

• The charger will continue to operate even after the vehicle has been switched off, however once the

main starting battery falls below 12.5 volts the charger will automatically shut off.