DAEWOO ELECTRONICS FRA-X22D Посібник користувача Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача Посібник користувача для Холодильник DAEWOO ELECTRONICS FRA-X22D. DAEWOO ELECTRONICS FRA-X22D 18 сторінок.

Друкувати сторінку
Do not let the power cord be crushed by other
(heavy) objects .
If you hear a strange noise, strong chemical odour
or find smoke etc. from the refrigerator after the power
is plugged in, pull out the plug immediately and call
the service agent.
Wait about 5 minutes before you plug-in again in
order to prevent any damage to the compressor and
electrical devices of refrigerator.
Wait 2~3 hours until the inside gets cold enough after
the first power plug-in, then store foods inside.
(There can be some smell of plastic parts on initial
operation of the refrigerator after plugging in.
The smell fades away as the refrigerator works and
doors are opened and closed.)
Precautions in use
To prevent personal injury, fire, electric shock etc. read
this user guide carefully before use and keep it at
hand for any reference.
Accessories
Filter box

Control Panel

Dispenser Model
1.
FRZ.SET button
Selection button for freezer compartment
temperature.
Interior lights of the refrigerator turn off when the doors are open for more than 10 minutes.
Note
In case either the freezer or refrigerator door is left open for more than a minute, door alarm rings for 5 minutes with
1 minute intervals.
Display off function
- 5 minutes after no buttons or doors are operated by customer, all the display LED except for water, ice and ice lock icon
go out.
- Under the LED off status, it returns to normal display mode when customers operate buttons or doors.
System off function (power off function)
- You can stop operating the appliance without unplugging especially on holidays.
- Pressing FRZ.SET and REF.SET button at the same time for 5 seconds will turn the appliance off.
- Under the 'off' mode, freezer and refrigerator temperature displays "-- --".
- Other LED lights go out and all the operation of your appliance halt.
- Conversely, pressing FRZ.SET and REF.SET button together for 5 seconds will switch it back on.
Water supply kit
User guide manul
2.
LIGHT/FILTER button
1) Button for dispenser light on.
2) Button for filter exchange or reset.
After exchanging or to reset press the button
for 3 seconds.
3.
Displays the button 'Lock'.
4.
Filter exchange display
After 6 months of first power input, the icon will
flicker.
5.
Button for water dispensing. Water symbol lights up
when selected.
6.
Selection button for ice dispensing and lock for ice
maker.
7.
REF.SET button
Selection button for refrigerator compartment
temperature.
8.
Lock button for control panel
Press button for more than 3 seconds to activate
and prevent settings from being unintentionally
changed. To release the button, press for longer
than 3 seconds. The display goes out.
Non Dispenser Model
1.
Displays the button 'Lock'.
2.
FRZ.SET button
Selection button for freezer compartment
temperature.
3.
REF.SET button
Selection button for refrigerator compartment
temperature.
3