Dot Origin VTAP100 Посібник з монтажу - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з монтажу для Мережеве обладнання Dot Origin VTAP100. Dot Origin VTAP100 13 сторінок. Desktop usb reader
Також для Dot Origin VTAP100: Посібник з монтажу (16 сторінок), Посібник з монтажу (17 сторінок)

Друкувати сторінку
A typical RS232 cable has the following D9 connector pinout:
The VTAP100 requires a 5V power supply. This can either be provided via:
J1 (pins 1 and 3) and the serial cable/host (not all RS232 devices have 5V on pin 9), or
l
other USB connectors on the VTAP100 PCB.
l
Some serial cables have a separate DC 5.5/2.1mm barrel connector to supply power. In these
cables, typically, the centre pin is +5V and the outer barrel is GND.

3.5 Optional wallbox

The optional wallbox for a VTAP100 is 86mm x 86mm and 25.5mm deep.
You can design and affix your own branded label to the unit. The size of the label recess is 72.33 x
72.33 mm with 4mm radius rounded corners as shown below. If you need help branding units do
VTAP100-OEM V3A INSTALLATION GUIDE
Figure 3-4 Typical RS232 cable
Pin
Function
2
3
5
9
Figure 3-5 VTAP100-USB
TXD
RXD
GND
+5V supply
PAGE 6