Dot Origin VTAP50 Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Блок управління Dot Origin VTAP50. Dot Origin VTAP50 16 сторінок. Oem module

Safety instructions

WARNING: INTENDED USE

The VTAP50 equipment is intended for use by suitably qualified integrators, who will

integrate the VTAP50 OEM module (PCB) into their own hardware, without any changes or

modifications to the VTAP50 OEM module device. (An optional wallbox case can be

supplied.) Components mounted on the VTAP50 PCB are not user-serviceable. Product

safety has been tested to comply with IEC 62368-1.

WARNING: ESD PRECAUTIONS

We recommend careful handling and storage of Electrostatic Sensitive Devices (ESDs) during

installation. The VTAP50 OEM module (PCB) should always be protected by static shielding

bags for shipping or storage.

WARNING: POWER SUPPLY

Use either a MicroUSB to USB cable, or the optional captive cable, if any, to connect the

VTAP50 OEM module PCB to a PC. (Never connect both at the same time).

Using other cables will invalidate EMC emissions and immunity certifications.

The VTAP50 is rated at 5V DC (typ. 110mA, max 150mA) for power over USB.

VTAP50 OEM MODULE INSTALLATION GUIDE

PAGE II