Dot-Spot clarios-mini Посібник оператора - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник оператора для Ді-джейське обладнання Dot-Spot clarios-mini. Dot-Spot clarios-mini 20 сторінок.
Також для Dot-Spot clarios-mini: Посібник оператора (15 сторінок)

Друкувати сторінку

Assembly

1. Assembly with mounting bracket

2. Assembly with ground spike (optional)

3. Using the extension adapter and installation extensions (optional)

GAW_clarios_mini.indd 14

Draw a hole on the ground through the broad foot of the mounting bracket. Drill

a hole in the ground and equip it with a suitable plug. The included plug is suitable

for mounting on substrates made of concrete, stone and masonry. For wood

surfaces, the mounting angle can be mounted directly with the supplied screw

with using the plug. In the case of hardwood it may be useful drilling a hole before

mounting.

Place the mounting bracket right over the plug, align in the desired direction and

tighten it up with the supplied screw. Now the clarios-mini can be attached to the

mounting bracket. Plug the supplied screw through the hole of the mounting

bracket and fix it laterally with a 4 mm hexagon-wrench into the threaded hole on

the light housing. Adjust the spotlight before tightening into the desired direction.

The optional stainless steel spike is suitable for mounting on loose surfaces e.g.

earth, sand and others. Attach the mounting bracket on the spike first. Use there-

fore the screw which is included with the spike. Check the firmness of the ground

and push the spike into the ground. If necessary, put a piece of wood on it and tap

it lightly with a hammer.

Now install the clarios-mini as described under 1 with the mounting bracket.

Instead of the mounting bracket you can also use the extension adapter and

installation extensions to fix the clarios-mini. This is especially recommended if you

want to mount the spot in an elevated position. The extension adapter may be

implemented using appropriate wall plugs with M6 internal thread to be mounted

on various substrates.

07.10.2011 12:55:37