DAGU Playful Puppy Посібник користувача

Переглянути онлайн або завантажити pdf Посібник користувача для Робототехніка DAGU Playful Puppy. DAGU Playful Puppy 15 сторінок. Quadruped robot kit

USER GUIDE

Dagu ''Playful Puppy'' Quadruped Robot Kit

Step 1. Center your servos

The QuadBot chassis kit includes 8x miniature servos and the Pan/Tilt kit includes 2 miniature servos.

These servos have clear cases so you should be able to see through them well enough to check that they

are centered.

When the servo is centered it can physically turn the same amount in each direction (approximately 90

degrees). Before you begin assembly check that all 10 of your servos are centered. This will save you

time in later steps. Once the robot is assembled, the center position of each servo can be refined in the

software if required.

Step 2. Attach the foam rubber feet

Instructions are included with the QuadBot chassis and can also be downloaded from my DAGU

product support site . I will go through them in detail here.