DAGU Scamper Kit Посібник з монтажу - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з монтажу для Робототехніка DAGU Scamper Kit. DAGU Scamper Kit 12 сторінок.
Друкувати сторінку13
Connect the wires to the switch.
Note position
of metal tab.
14
15
Encoder 2
Pay attention to the wire colours!
You must connect the wires
as shown to ensure the robot
works correctly with the
demonstration software.
M3
Battery
+
Wheel 2
Encoder 1
Wheel 3
-
M2
Wheel 1
！
Make sure the switch is
"OFF" during assembly
to prevent accidental
short circuit.
Pay attention to the wire colours!
You must connect the wires
as shown to ensure the robot
works correctly with the
demonstration software.
M1
Encoder 3
Triangles on PCB
indicate signal
pin (white wire).
Warning!