Asus BE279 Series Посібник користувача - Сторінка 20
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Asus BE279 Series. Asus BE279 Series 39 сторінок. Hdmi
Друкувати сторінку
2.5
Connecting the cables
Connect the cables as the following instructions:
•. To.connect.the.power.cord: Connect one end of the power cord securely to
the monitor's AC input port, the other end to a power outlet.
•. To.connect.the.VGA/DisplayPort/HDMI/USB.Type-C.cable:
a.
Plug one end of the VGA/DisplayPort/HDMI/USB Type-C cable to the
monitor's VGA/DisplayPort/HDMI/USB Type-C jack.
b.
Connect the other end of the VGA/DisplayPort/HDMI/USB Type-C cable
to your computer's VGA /DisplayPort/HDMI/USB Type-C jack.
c.
Tighten the two screws to secure the VGA connector.
•. To.connect.the.audio.cable:.connect one end of the audio cable to the
monitor's Audio-in port, the other end to the computer's audio-out port.
•. To.use.the.earphone: connect the end with plug type to the monitor's
earphone jack when an HDMI/DisplayPort/USB Type-C (DisplayPort Alternate
Mode) signal is fed.
•. To.use.the.USB.3.0.ports:
»
Upstream: Use the supplied USB Type-C to Type-C, USB Type-C to
Type-A or USB Type-B to Type-A cable. Make sure your computer is
installed with the latest Windows 7/Windows 8.1/Windows 10 operating
system. That will enable the USB ports on the monitor to work.
»
Downstream: Plug the USB Type-A cable of your device to the monitor's
USB Type-A jack.
When these cables are connected, you can choose the desired signal
from the Input Select item in the OSD menu.
2-4
BE279CLB
BE279QLB/BE24EQSB
Chapter 2: Setup