Double K Industries Challengair 2000XL Інструкція з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Засіб для догляду за домашніми тваринами Double K Industries Challengair 2000XL. Double K Industries Challengair 2000XL 4 сторінки. Animal dryer
Також для Double K Industries Challengair 2000XL: Інструкція з експлуатації (4 сторінок)
Друкувати сторінку
Place Screw Driver Tip Between Clip and
Plastic Brush Body. Rotate to Separate Tab
from Brush.
Detail A
Brush Assembly
6
Flag Connector
Brush Retainer Bracket
Brush Retainer
Bracket Screw
Congratulations!
CHALLENGAIR 2000XL™
You've just purchased the Double K
produces warm, high velocity air under pressure, to allow you to dry your animal perfectly.
Your new dryer is designed to provide long, reliable service.
Please read this manual carefully and completely before beginning operation of your dryer
and keep in a convenient and safe place for future reference. A warranty card is included with
your dryer and should be lled out completely and mailed to Double K Industries within 30
days of the purchase date of your dryer to validate your warranty. Online registration is
available at www.DoubleKIndustries.com
CHALLENGAIR 2000XL™
Your
has a two-year warranty covering the unit against defects in
materials and workmanship. Regular maintenance items such as brushes and lters are NOT
included (see warranty card for complete warranty information). It is also important to retain
your sales receipt as proof of purchase should service ever be needed.
CHALLENGAIR 2000XL™
Your
has one brush-type motor. It is important that the brushes be
changed when they become worn down to prevent damage to your dryer motor (brushes are
maintenance components and are NOT covered under the warranty). We suggest checking
the motor brushes after every 600 hours of dryer use. Please see section on BRUSHES in this
manual for instructions.
CHALLENGAIR 2000XL™
A NOTE ABOUT HEAT: Your
CHALLENGAIR 2000XL™
produces heat by a " ow-thru" motor system, meaning the air is
pushed through the motor and is warmed by the natural heat of the motor that occurs during
operation. This means greater electrical savings and e ciency for you. The dryer will reach its
maximum air temperature after about 2-4 minutes of operation. (Note: The higher the room
temperature, the warmer the air from the dryer will be.)
ASSEMBLY
To attach hose to dryer: Your dryer hose has a black hose adapter that will screw onto the hose
in a counter-clockwise motion. The adapter with hose attached then ts onto the dryer with a
half-twist motion that locks the adapter onto the dryer.
First, place the adapter over the snout of the dryer with the Double K logo facing up, then turn
hose counter-clockwise until the adapter locks in place, the Double K logo should then be
sitting horizontally.
To remove hose from adapter: Turn the hose clockwise.
ATTACHMENTS: Your dryer is equipped with one hose, 2 twist-on nozzles, 1 nozzle extension
and 1 compression t nozzle. To attach nozzles to hose, twist the nozzles counter-clockwise.
Twist clockwise to remove. See Attachment Guide on page 8.
OPERATION
Switches and Controls:
1. 2-Speed:
Low Speed / Standard Heat - Turn on the top motor switch.
a.
b.
High Speed / High Heat - Turn on both motor switches.
2. Variable Speed (optional)
Maximum Output - Turn the dial speed control clockwise to its maximum.
a.
b.
Variable Output - Turn the dial speed control clockwise to desired air output.
c.
O Position - Turn the dial speed control counter-clockwise until it clicks o .
Forced Air Dryer, which
has no heating element. The
3