DoubleSight DS-10UT Посібник користувача - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор DoubleSight DS-10UT. DoubleSight DS-10UT 18 сторінок.
Друкувати сторінку
User's Guide
Symptoms for possible problems and responses
■
When there is any problem, make sure to check the followings first.
Q :
The USB monitor screen is not displayed.
A :
(1)
Check if the USB cable is correctly linked and if the USB Driver is installed.
(2)
Check if the blue LED color on the USB monitor is come on and if the power button is
turned Off.
(3)
Check if the tray monitor icon on the lower side of the monitor has 'Off'.
(4)
The USB monitor reads the general USB device on the PC. If quick and repeated turning on
and off is made, the USB vice may have problems that you may refer to problem solving
method for the USB device from the Customer Support site of Microsoft.
- Press the right button from "My Computer" of the base screen to display the 'Attribute' window.
- Click the system administrator.
- Press the HW change search from the motion menu.
- Re-boot the PC.
Q :
The screen on the USB monitor has stopped its motion.
A :
Booting is not made after linking the USB monitor.
(1)
In the PC with on-board type that uses the i815 chip set mother board has to re-boot by
changing the legacy USB support option to [No Change] at the BIOS set menu.
* The entry method of BIOS may differ depending on the PC that the manual of the PC in use has
to be referred to. For detailed information, refer to the homepage of Microsoft.
Q :
How can I remove the installed program of the USB monitor?
A :
Select Program 'Add/Remove' from the control board to select the Displaylink Graphics
from the list of 'currently installed programs' and click "Remove" to delete.
Q :
Touch Screen doesn't work.
A :
(1)
After reconnecting USB cable, please check out the "USB Connection"
* If there is no icon, reconnect USB cable and on again.
(2)
When you change USB port or calibration get twisted, click 'Touchside - Tool - 4Points
Calibration" and reset calibration.
(3)
Reboot PC after driver installation.
USB MONITOR
14
icon on touchside.