Doug Fleenor Design Preset12 Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Блок управління Doug Fleenor Design Preset12. Doug Fleenor Design Preset12 11 сторінок.
Друкувати сторінку
To Set Canceling Groups to Custom Configurations
Enter set up mode.
Press and release button 7. LEDs will stop chasing.
Press and release the first preset in the group.
Press and release other presets in the group, one by one.
Press and release the first preset in the group again. This cancels the grouping.
LEDs will begin chasing.
To set another canceling group, press and release button 7 and proceed as above.
To Set All Fade Times to One Value
Enter set up mode.
Press and release button 2. LEDs will stop chasing.
Enter a two digit fade time (use button 10 for the digit zero).
LEDs will begin chasing.
To Set Individual Fade Times
Enter set up mode.
Press and release button 8. LEDs will stop chasing
Press and release the preset button for which the fade time is to be set.
Enter the two digit fade time (use button 10 for the digit zero).
LEDs will begin chasing.
To set another fade time, press and release button 8 and proceed as above.
To Set Lock Status for All Presets
Enter set up mode.
Press and release button 3. LEDs will stop chasing.
Press and release the button for one of the following configurations:
1) All presets unlocked. Any preset can be recorded at any time.
2) All presets recordable only from external DMX512. (Locked if DMX is absent)
3) All presets recordable only from Preset12. (Locked if DMX is present)
4) All presets locked.
LEDs will begin chasing.
To Set Lock Status for Individual Presets
Enter set up mode.
Press and release button 9. LEDs will stop chasing.
Press and release the preset button for which the lock mode is to be set.
Press and release the button for one of the following configurations:
1) This preset is unlocked. This preset can be recorded at any time.
2) This preset is recordable only from external DMX512. (Locked if DMX is absent)
3) This preset is recordable only from Preset12. (Locked if DMX is present)
4) This preset is locked.
LEDs will begin chasing.
To set another lock status, press and release button 9 and proceed as above.
Page 7 of 11