Baumer IO-Link RR30 Інструкція з експлуатації - Сторінка 25

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари Baumer IO-Link RR30. Baumer IO-Link RR30 40 сторінок. Radar sensor

200

Peak Selection Mode

4.7.2

The parameter defines the peak to be chosen for the calculation of the "Measurement Value" in the process

data. The selection relies on the 5 available peaks in process data after using the sensitivity filter. As in most

application the first peak is the desired, on it is the default setting. Please take care that when not operating

the sensor in the Peak Selection mode "First peak" or "Highest Peak" the risk in receiving a wrong

measurement is increased. If the measurement result is insufficient (e.g. wrong or weak signal), check the

placement and alignment of the sensors. The use of a corner cube can also help to obtain a better

measurement result.

en_BA_RR30_IO-Link_V0.23.docx

13.01.2021/

Very low

Medium (Default)

Very high

Distance (mm)

2000

Figure 23: Sensitivity Scale (Example)

25/40

4000

Baumer Electric AG

Frauenfeld, Switzerland