Baumer IO-Link RR30 Інструкція з експлуатації - Сторінка 33

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари Baumer IO-Link RR30. Baumer IO-Link RR30 40 сторінок. Radar sensor

Baumer IO-Link RR30 Інструкція з експлуатації

4.12.6 Tracking: slow

The "Tracking: slow - Profile" can be used for very slow or a not moving target. For good result the speed of
the target should be less < 0,01 m/s.

4.12.7 Tracking: standard

The Tracking "Tracking: Standard "-Profile should be selected when the objects are moving with a speed up
to a maximum speed of 1 m/s. In cases the profile will not work proper please select the slower or faster
version to test if an improvement can be achieved.

4.12.8 Tracking: fast

The Tracking "Tracking : Fast"-Profile should be selected when the object is moving with a speed of > 1 m/s
up to a maximum speed of 10 m/s. The maximum speed range depends on the characteristic of the objective
surface. For faster objects no tracking can be chosen. A good trackable surface can be detected at a higher
speed compared to a bad detectable target. In case the profile will not work proper please select the slower
version to test if an improvement can be achieved.
5

Diagnosis

In addition to solving the primary application, the evaluation of secondary data, such as temperature, supply
voltage or operating time, allows a predictive maintenance and thus optimum machine availability.

5.1 Device Status

Parameter name
Device Status
Detailed Device Status

5.2 Device Temperature

An integrated sensor allows to track the internal temperature of the radar.
Please be aware that the measured values are higher than the ambient temperature due to the internal
heating of the radar.
The temperature may also vary due to mounting conditions and the electric load connected at the output.
Parameter name
Device Temperature Reset
Device Temperature.Current
Device Temperature.Resettable
Min
Device Temperature.Resettable
Max
en_BA_RR30_IO-Link_V0.23.docx
13.01.2021/
Short Description
Indicates if the sensor is
working properly
Short Description
Resets the device
temperature statistic
Internal temperature of the
sensor
Minimal measured internal
temperature of the sensor
(Resettable)
Maximal measured internal
temperature of the sensor
(Resettable)
33/40
Rights
Unit / Allowed values
ro
- 0 = Device is OK
- 2 = Out of Specification
- 4 = Failure
ro
Rights
Unit / Allowed values
wo
ro
ro
ro
Baumer Electric AG
Frauenfeld, Switzerland