Baumer O200 Інструкція з експлуатації - Сторінка 16
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари Baumer O200. Baumer O200 34 сторінки. Sensors with io-link
Друкувати сторінку
4.3.3.2 Release Delay Time
The release delay time defines the time, where the measurement value needs to be below (single point) or
outside (window mode) of the switchpioints of the related SSC, until its status is changed to inactive (or
active, if the logic is inverted as described in section 4.3.2.1)
When to apply?
To avoid false switching operations in case of an object which is not 100% stable to detect over the
-
whole length
To supress short losses of a proper signal due to known disturbances such as the wheel of a
-
To avoid bouncing.
-
To optimize the timing of the execution of a subsequent actor triggered by the output of the sensor.
-
To detect a unwanted gap size within a continuous flow of products.
-
Parameter name
Release Delay.SSC1 Time
en_BA_O200_IO-Link_V1.docx
15.08.2018/
Figure 19: Release Delay
Short Description
Sets the release delay time,
Available for SSC1 and SSC4
16/34
mixer.
Rights
Unit / Allowed
values
rw
0 to 60.000 ms
Baumer Electric AG
Frauenfeld, Switzerland